High Precision Linear Motion Ball Screw Bearing BF15 15mm Double Iron Covered

High Precision Linear Motion Ball Screw Bearing BF15 15mm Double Iron Covered

Produce features:

1, Precision bearing used, has been sealed in a proper amount of lubricating grease to avoid maintenance.

2, Dyed black specification, bearing for double iron cover; Nickel specification, bearing contact type double rubber cover.

Installation steps: install the fixed end to the screw.
1. Do not disassemble the support seat;
2. Be careful to avoid scratches on the outer lip when placing the screw into the support seat.
3. After the fixed end of the support bracket, the nut is locked with the inner hexagon screw and the copper washer.
4. Assemble the supporting end bearing to the screw body, and put the assembled part into the supporting end shell with the elastic buckle.

Ball screw support Installation steps: install to the platform and base.

1, Make slide and ball screw link temporary fixed by screws, to design the fixed end of temporary fixed to the base, the fixed end moving slider makes the screw set, adjust the screw to the center of the slider move smoothly.

2, When using the fixed end of the support seat as the reference point, adjust the screw and the sliding table, or the gap between the screw and the connecting block. When using the fixed end of the support seat as the reference point, the axle height of the high-speed support seat is high. (supports are square)

3, Move the support end of the slider to the screw, adjust the center point of the screw, move to the left to the right to check whether the slide is smooth, and then fix the system on the base for a while.

The bearing has been sealed in a proper amount of lubricating grease to avoid maintenance.

Dyed black specification, bearing for double iron cover; Nickel specification, bearing contact type double rubber cover.