Ultra Ideal Bearing solution!
Payment & Shipping Terms:
|Direction Of Helix:||Right Or Left||Cage Material:||Nylon Cage, Steel Cage|
|Produce Code:||Grinding Or Rolled||Flange Type:||Not Cutting Single Cutting Double Cutting|
|Dynamic Load:||882KN||Static Load:||370KN|
Precision Linear Motion Ball Screw Inner Loop Single Nut High Speed Low Noise
The ball screw consists of screw, nut, steel ball, prepress, inverter, dustproof device. Its function is to convert rotary motion to linear motion, this is actmix further extension and development of the screw, the significance of the development is the bearings from sliding action into a rolling action. Because of the small friction resistance, ball screw is widely used in various industrial equipments and precision instruments.
Ball screw is the most commonly used on machine tools and precision machinery transmission components, its main function is to convert rotary motion to linear motion, or convert torque into axial force repeatedly, at the same time combines the characteristics of high accuracy, reversibility and high efficiency.
Ball screw installation:
1, nsert the ball screw nut into the nut holder and hold it temporarily. ( place the nut in the middle of the ball screw shaft )
2, Temporarily fix the support unit of the fixed side and support side to the base.
3, After the moving table and the fixed side support unit, the support unit shall be tightened to the base.
4, After fixing, move the table to the end of the stroke near the fixed side, and hold the table and nut support to each other.
5, Fasten the nut and nut support.
6, Loosen the bolts of the fourth cloth and fasten the table and nut support. Push the work table to the fixed support unit to adjust its center position so that the workbench can be moved smoothly. For the precision workbench, the silk rod shaft should be adjusted to the parallel position with the LM guide rail.
7, After fixing, confirm the operating status of the workbench and move the table to support.
8, After moving the table to the support side support unit, tighten the mounting bolts of the support unit.
9, After fixing, move the table near the end of the trip near the support side, and then fasten the table and nut support once again.
10, Move the workbench to the fixed side and move around to confirm the running state. Back and forth movement many times the workbench can be adjusted to the full range of the smooth operation of the state.
11, If there is a noise and blockage in operation, please repeat the process of 3-10.
BALL SCREW SFE TYPE CATALOG